Warsensor FAQ (MUST READ)

Q. What do I do First when My gun comes?
A.
-First things first....Take it apart clean it..make sure no metal shavings are in the gun or dirt...etc...
-Second Lube all necessary items....O-rings, bolt, striker ...Blah Blah Blah
-Third Put all back together....CAREFULLY....Don? put it back together wrong or you screwed up....Make sure the Barrel (Hop up system) is pointing up in the 11p.m.-12 p.m.-1 p.m. Position.....
-Now Tighten Everything...Not To tight that you cant remove it...But Tight
-Screw in CO2....Listen for leaks.....If there is a leak it may be the Cupseal or user problem....
-Shoot a few balls threw it....

Q. After every day of playing paintball what do I do?
A. After every day of playing do basically the same thing as when you first get it.
-Disassemble
-Clean (inside and out)
-Dry
-Lube (o-rings, bolt, and striker)
-Assemble
-Love (don't forget guns have feelings too)

Q. How does the barrel work?
A. There are three grooves that allow air to pass freely above the ball. This in turn causes more pressure to build up on the lower part of the ball making it spin backwards as it's traveling forward. It's simple science. But, unlike the flatline the 47 barrel it doesn't force the ball to curve so you can tilt the marker at 90*s and still shoot just as far.

Q. Where do I buy the Warsensor?
A. All of Warsensor products can be purchased from any Authorized Warsensor Dealer, Which can be located here

Q. If my Warsensor breaks are there parts to fix it? or can it be fixed?
A. Yes there are parts to fix it. These parts can be found at any of the Authorized Dealers.

Q. Are there upgrades avalible?
A. Of Course there is what gun doesnt, all of them can be located at Autorized Dealers